Double Wheel Sand Washing Machine Maintenance
Qingzhou Yongsheng Environmental Protection sand digging Equipment Co., LTD., has produced two-wheel sand washing machine for many years.
The two-wheel sand washing machine has the advantages of full hydraulic type, large capacity, high efficiency, large digging depth, strong strength, high quality and so on.
After years of painstaking research, the company has formed a set of high technical content system.
It has rich experience in the construction of two-wheel sand washing mechanism, and has methods for the use and maintenance of two-wheel sand washing machine.
The following is an introduction:
1. According to the actual geographical situation in the work of dredging sand in advance or retreat, the action should be flexible, such as large stones, mud, etc., must be cleaned up in time.
2. Check and ensure that chain screws, pins and fixed point fasteners of transmission system are firm at all times.
3. The double wheel sand washing machine should stop before the diesel engine, and then stop after the diesel engine.
4. In case of strong wind (grade 5 and above) the double wheel sand washing machine should temporarily stop working, so as to avoid failure; In addition, maintenance or replacement parts should be shut down to avoid personal injury.
5. In the process of using the double wheel sand washing machine should often check the screws and often add lubricating oil maintenance, especially hopper screws and chain pins, water four Angle wheel and 500 reducer connecting plate and other parts of the bolt must be fastened intact.
Yongsheng double wheel sand washing machine flow: 500-2000m³/h, can be tailored according to the needs of different customers, we are committed to after-sales service: have the installation and after-sales team.
Ensure to discuss and solve the problem within 24 hours and enter the after-sales service procedure within 72 hours.
